Table of Contents
How to change my IP address windows 10 is a technique that we might encounter at some point in time. When we connect to a local network and the personal computer we are using is given as an IP address, permitting other devices to navigate and correspond with it and signifying that the device itself has been correctly authenticated. The more extensive the network setup is, the more IP addresses will be used by the clients, which can create some allocation glitches.
How to Change My IP Address Windows 10
In most scenarios, IP address allocation is viewed by your local router; to change the owned IP address on a Windows 10 PC, there would be a need to configure to know how to change my IP address windows 10 for the whole network. We intend to set a static IP address or change our public IP address for all your computer and related devices on the subsidiary.
There are plenty of reasons why and how to change my IP address windows 10. Typically, a local network is a router that will allocate a temporary IP address with our designated device when we connect using DHCP (the protocol used to assign IP addresses), giving it a temporary lease to that address. There would be a need to be renewed; otherwise, you could be allocated a new address.
Realistically, this usually happens automatically; problems can sometimes occur. A poorly configured or dynamic local network and misconfigured devices might result in the same IP address being allocated twice, causing conflicts.
If this happens, we may want to set a static IP address, giving your device a permanent address. You’ll want to do this for devices regularly accessed by other devices, such as home servers or network-attached storage devices.
These all apply to local networks, but you may want to change the IP address given to you by your internet service provider. This can be trickier, but there are a few ways to change this address if your ISP allows it.
1. Configuring Your Network Router
Configuring Your Network Router DHCP Settings is one of the convenient techniques to change the IP address to rectify the network router to allocate a new IP address. To carry out this, one must configure the DHCP settings on the router to assign IP addresses differently. Moreover, we can set a static allocation for your Windows personal computer. When the device connects, your router will always give a similar IP address to it by using your device’s MAC address so that it can be identified easily.
If you don’t intend to carry out this procedure, you could also modify the IP range used by the local router. It clarifies that your local IP address may vary from time to time, but the range of addresses will differ. Your IP address may change from 193.167.0.12 to 193.169.12.11, for instance.
The techniques to change my IP address in windows 10 to change your DHCP settings will also vary, but you’ll typically find DHCP settings listed under its section (e.g., DHCP). In contrast, one can find fixed IP allocations under address allocation or similar IP allocations.
Meanwhile, releasing DHCP Lease and resetting your dynamic IP leads to changes you make to your router’s DHCP settings that may require you to release or renew your Windows IP address using the Windows PowerShell.
By using Windows PowerShell, proceed to right-click on the Start menu and then click on the option of the Windows PowerShell (Admin) portal. In the window of the PowerShell terminal, type ipconfig /release to eject the DHCP lease and finally disconnection. With the new settings in the pipeline, type ipconfig /renew to proceed with the reconnection. If the router settings have been correctly rectified, releasing our changed DHCP lease and resetting the new IP will ultimately result in a new IP address being allocated to your device.
2. Setting a Static IP Address
Setting a Static IP Address to change my IP address in windows 10 is important. A static IP address can be attained via a fixed DHCP allocation, though we can also set it by manual settings in your Windows 10 settings. We may want to do this if you’re directly connecting to another device.
It may also render to work with their local router, but an IP conflict may occur as your connecting device is already assigned an IP using DHCP. In this case, it is worth using a fixed IP allocation instead of anything else.
To create and set a static IP address, open your network settings by clicking on the start menu and the Network Connections in the provided options. In the Network Connections settings menu, tap on the possibility of changing connection properties. Once under the IP Settings category, proceed to press the Edit option. Afterward, change the IP allocation type to the setting of the manual. It is better to enable either IPv4 or IPv6, then type the static IP settings you wish to apply. An example configuration for a static IPv4 IP address would include 193.167.1.12 for IP address, 25 for subnet prefix length, and 193.167.0.2 for a gateway referring to your local router and is a prioritized DNS server.
Furthermore, click on the Save option once you are done. Your IP address settings will be applied and enabled automatically. Additionally, we may need to release the existing IP by using the steps mentioned above or restart the personal computer for the changes to take effect fully.
There are specific techniques to know how to change my ip address windows 10 ; your public IP address is assigned by your internet service provider, giving you access to the internet. This is set to your modem (usually combined with your network router, but not always), allowing all connected network devices to the internet. Changing this address can sometimes be challenging. First, we will need to check if you’re assigned a dynamic (temporary) or static IP address by your ISP. If you’re given a static public IP, your ISP will need to change this.
3. Switch Network Modem
You can usually reset this for dynamic IP addresses by switching your network modem off for some time. By carrying out this technique, we are disconnecting the device from ISP. As with the local network, eventually, the public IP lease will run out of order, so there would be an allocated new IP address at this point. Moreover, it cannot be guaranteed, and you may need to try another method. If your public IP address doesn’t change, plenty of other ways could be implemented by making use of a virtual private network that will hide your public IP as you browse online, for instance.
Wrapping Up
Configuring Your Network on how to change my ip address windows 10 is mandatory. Either we are configuring a server for your network (or for more comprehensive internet users), or one intends to want to free up allocations for other devices, it’s an easy process to know how to change my ip address windows 10, although much of the work relies on being able to access your router to configure your network properly. If the network configuration settings create issues, we may wish to reset the network router to eliminate the bugs and start over again. IP allocation problems might be why we strive for network connection glitches. Fortunately, numerous methods exist to fix unidentified network problems on Windows 10.
