high-performance Wi-Fi modem

Every wireless gadget in your home connects to your network, and if you’re like many people nowadays, an hour or two without Wi-Fi might leave you feeling anxious. 

Using this simple approach, you can get your connections up and running by installing a new modem. 

While this simple procedure should help you get your new router online, keep in mind that each model will be slightly different. 

Many recent models include a faster setup procedure that combines or bypasses parts of these processes or allows you to handle your setup altogether via a smartphone app. 

When in doubt, stick to the instructions that came with your modem.

high-performance Wi-Fi modem

How To Install A Wi-Fi Modem?

Once you figure out how to install a high-performance Wi-Fi Modem, you can browse The Pirate Bay and download as many movies and games as you want. So, let’s find out the steps to install a new Wi-Fi modem in your home.

Step 1: Check Your Internet Connection

Suppose you’re connecting the modem to an existing ISP gateway. In that case, you probably know if your internet is functioning or not. 

When there is nothing wrong with the modem itself, a faulty connection might require a long and tedious attempt at router installation. 

If you’re installing your modem as part of relocating to a new house or apartment, it’s especially vital to ensure that you have an active internet connection.

This is because you’ll be configuring your router alongside a newly installed or activated internet service.

Step 2: Place The Modem

Pay close attention to any paperwork that comes with the router as you unpack it. 

Keep an eye out for any stickers or scraps of paper that could include important configuration information, such as the address for the router’s web interface or the default login and password. 

You should install antennas if they are distinct from the primary router device. This is usually accomplished by screwing them into the router’s connections on the back or sides. 

In other circumstances, the router’s antennae will be pre-installed and will simply need to be stretched and positioned. After you’ve unpacked and constructed it, you’ll need to keep the modem in a safe place.

Step 3: Connect To Power

When you turn the modem on, you should see the router’s indicator lights turn on. 

Some will flicker or change color to indicate different functions and modifications during the setup process.

However, a light illuminates when the router is correctly plugged in and switched on. 

Wait a minute or two after connecting in the router since it may take a few seconds to boot up.

Step 4: Connect To The Internet Source

Next, connect your modem to your internet source, which might be a cable modem, DSL modem, or similar ISP gateway. 

You’ll need a simple Ethernet cable hooked into the router’s WAN or internet port for this. 

This port is commonly differentiated from the other ports on the device by a different color, or it may be physically isolated from the other ports by a gap. 

Finally, you should test the modem’s connection by inserting your laptop into one of the device ports on the back of the router. 

Step 5: Access The Modem’s Web Interface

While you have a computer connected to the new modem, this is a perfect moment to configure a new network name and password. 

You’ll also need to use the same online interface to upgrade your firmware, change your security settings, and activate your Wi-Fi.

While you’re configuring Wi-Fi, you should also select an encryption protocol for your wireless network. 

If provided, avoid Wired Equivalent Privacy, as the standard has been proved to be horrifically insecure for at least the last decade. 

Step 6: Connect Wired Devices

You’ll need an Ethernet cable for any item you wish to physically connect to your routers, such as a printer, gaming console, TV, or internet phone system. 

Connect the connected device to one of the modem’s accessible ports on the rear.

We advocate utilizing Wi-Fi Protected Access II (WPA2) security since it is far more secure.

Step 7: Connect To The PC

Finally, connect the rest of your devices after your Wi-Fi network is up and operating. 

If you haven’t already, you should change the router’s name and password. 

Logging onto your new Wi-Fi network will require you to know both the network name and password.

high-performance Wi-Fi modem
selective focus of black plugged router on white table and businessman sitting on sofa

Closing Thoughts

Now, you should be able to start a wired connection on the modem as immediately as you confirm an active internet connection. Starting the modem should not be a big deal if you have already established that.

However, if you want to know more about it, you can post your questions in the comment box below. We will get back to you with an answer as soon as possible.

Read More: HOW TO GET UNLIMITED FREE DATA FOR ANDROID

LEAVE A REPLY

Please enter your comment!
Please enter your name here