How to use your own router with AT&T fiber is often discussed among the masses. People around the globe rely on their residential or broadband internet to accomplish most of their work done, be it for official or personal reasons or online shopping; it has us all covered under one roof. In recent years, the internet service providing company AT&T has built quite recognition for themselves with their fantastic deals and internetworking speed.
AT&T provides you with the premium package of the best router for att fiber that you need to use the internet with the comfort of your living area. This article will help you with the step-by-step guide on how to use your own router with at&t wifi gateway without spending any extra penny on a new router.
We can use your own or a third-party router with at&t wifi gateway. They provide a residential gateway as you opt to purchase their subscription for AT&T U-verse or at&t wifi gateway. Moreover, setting up a third-party router is very easy and convenient. However, if compared with the high-end routers provided by AT&T, which consists of many features, your router might lack some.
Additionally, at&t wifi gateway does have some setbacks when configuring other routers except their own. at&t wifi gateway might be troublesome in some respects.
Sometimes, we might face problems while setting up our DNS servers. These are significant setbacks as it means either choosing a lower performance and weak security or learning all the nitty and gritty of hard coding mechanisms to set it up and coming to another notion that the budget is also a means of concern while wandering to purchase of wifi internet connection.
Though AT&T provides benefit plans to its customers at an affordable range, their routers can be a bit pricey. Moreover, their costs on routers are not elastic and only offer few generic perks. On the other hand, we can purchase a third-party router, where you will have a vast number of choices to choose from.
Besides, AT&T does not offer the most important parental control features. This is a loophole but also a perk if you use it wisely. Many third-party routers come with amazing parental control features and give you absolute control to turn the internet on and off.
Here is a detailed step-by-step guide to set up your router without any hassle. Firstly, choosing an appropriate router. It would be a good support if you always kept in mind certain factors while purchasing a third-party best router for att fiber. Moreover, third-party research routers and what features we might require from the router. Secondly, it is better to ensure that the router is compatible with the at&t wifi gateway.
Secondly, by navigating the ogin information for the gateway. Once unpacking the new router, it is best to set it up timely. To begin with, we need to find the login information for that gateway access. This credential and details consist of a username and a password, which will provide to you while you sign for the at&t wifi gateway connection. The gateway login data is of importance as it is the only way to proceed with the gateway settings and then looking forward to setting up a third-party router.
Thirdly, log in after you enter your login credentials; then the next technique is to click on the option of login. Now, we have to open a browser on your personal computer, desktop, or laptop. After this, type 126.96.36.199; this is the IP address for your best router for att fiber configuration or settings.
The fourth step involves settings. After entering the IP address, it will direct you to the gateway. Here, it would be best if you searched for the settings tab. After you locate it, go to LAN and DHCP. Now, we need to craft the range to 188.8.131.52 and cache it.
In the fifth technique, proceed for plugging. In the further step, our internet will turn off automatically. Now, plug in the new third-party router that we have purchased. We need to keep in mind to connect it with your att fiber router and an authentic power source. Finally, unplug the network cable from your laptop or personal desktop computer and plug it in again.
The sixth parameter is accomplished by going back to settings options. In the further step, go back to the gateway setting and move on to the firewall section. Now, select applications, pinholes, and DMZ. As we are done with this step, it will show the details about the new router and the connected devices that will be visible on your computer screen. Then proceed to your router settings and click on the option “allow all applications.”
The seventh step is the configuration. Once we have access to the configuration page, there we can see the public IP address. If the address is 172.18, it clearly states that the configuration process had some glitches. In this kind of situation, your steps and look for any errors in the setup process.
In the eighth method for stopping the AT&T Router. Lastly, before we further get into browsing the internet, make sure to disable the att fiber router you gave at the time of subscription. To disengage the AT&T router, go back to the gateway settings page and click on the “settings option.” Now, go to the LAN-Wi-Fi option. It is mandatory to verify if the status is “disabled” or not. Moreover, if we have a dual-band router, please disable both bands before using the internet.
How To Configure Your Router With an att fiber router, here is a detailed step-by-step guide to set up the router without any issues.
Step one is by selecting a router. It would help if you always kept in mind certain factors while purchasing a third-party router for your att fiber router. Firstly, research third-party routers and then decide what features we may require from the router. Secondly, make sure that the router is mergeable with the att fiber router.
Step two is by navigating gateway login details. Once unpacking and take out the new router, it is time to set it up. To initiate it, in the beginning, we need to find your login information for the at&t wifi gateway. These credential details usually consist of a username and a password, which will provide to you while you sign for the att fiber router connection. The gateway login data is of pivotal importance as it is the only way to access the at&t wifi gateway settings and set up a third-party router.
In the third step, we need to log in. After this, input your login details; the next step is to click on the provision of login. Then you have to open the browser on your desktop or laptop. After this, type 184.108.40.206; this is the IP address for your att fiber router configuration or settings.
The fourth step usually involves the settings. After entering the IP address, it will direct you to the gateway. It would be best if we searched for the settings option. Furthermore, navigate it and move to LAN-DHCP settings. Now, we need to alter the range to 220.127.116.11 and cache it.
The fifth step comprises plugging in the mechanism. Following, your internet will automatically turn off. Now, plug in your new third-party router. Meanwhile, don’t forget to connect it with your att fiber router and a good power supply. Then unplug the network cable from your laptop or desktop and plug it in again.
The sixth technique is by going back to the option of settings. In the next step, proceed to go back to the gateway setting and move on to the firewall section. Now, select applications, pinholes, and DMZ. After this step, it will show us the information about our new router device, and the linked device will be pop up on your personal computer screen. It is better to select your router and click on the option “allow all applications” (DMZ Modes).
The seventh technique is for the configuration of settings. Once we access the configuration page, we can see our public IP address. If the address is 173.16, it states that the configuration process had some mistakes. In scenarios like these, track your steps and look for any errors in the setup process.
The eight-step accomplished by disabling the att fiber router. To put it in a nutshell, before we further dive into browsing the internet, make sure to disable the att fiber router you gave at the time of subscription. To disable the att fiber router, go back to the gateway settings page and click on the “settings option.” Now, the proceed to LAN-Wi-Fi mode. Check if the status of the modem is in disable mode. Furthermore, we can have a dual-band router; please disable both bands before using the internet.
If we intend to use a third-party router and the att fiber router together, you can use it via Bridge Mode configuration. This technique helps you interlink both the routers on a single network without further aggravating the bandwidth’s working performance. This mode works by stopping the Network Address Translation or NAT feature located on the modem, and that prevents conflicts between IP addresses by authorizing the router to act as a DHCP server.
However, there are some issues with using the bridge mode; it is impossible to use it up to its peak level with an at&t wifi gateway. Using this pass-through mode also means that your firewall remains disabled, thus making your desktop or laptop susceptible to breaches.
Technically, purchasing your router seems quite reasonable as you can control the budget and have your own desired features. Although the setup can seem tiring, there might be some backlash if you decide to use both routers. Moreover, taking services of a third-party router also clarifies that AT&T will not provide us with any customer assistance or support. We can take help from the router company in the time of need. This was all the necessary information mentioned above in order to know how to use your own router with att fiber router.