HP Wireless Keyboard Without a Receiver

Before discussing how to connect HP wireless keyboard without a receiver, here we discuss some advantages of a wireless keyboard. Technological advancements have aggressively progressed rapidly within the last two decades. Remarkably, a wireless keyboard is considered the tip of the iceberg.

A wireless keyboard is a part of computer hardware that allows the user to communicate with computers, tablets, and laptops with the help of radio frequency (RF) that includes WiFi or Bluetooth and even infrared (IR) technology. Therefore, it is common for wireless keyboards available these days to be accompanied by a wireless mouse for better maneuvering.

HP Wireless Keyboard Without a Receiver

It cannot be denied that a Wireless keyboard normally comprises a tiny receiver that is used to build up a connection between the device and the keyboard. This kind of keyboard does not require Bluetooth functionality as it has a special radio frequency (RF) to connect with that provided receiver. Moreover, the same procedure goes with the mouse. Some of the keyboards and mouse also offer the Bluetooth feature; as a matter of fact, it is more convenient for the computer hardware to synchronize directly with the PC, laptop, and tablet.


How To Connect HP Wireless keyboard Without a Receiver?

This article focuses on the techniques and methodology by which we may easily connect an HP wireless keyboard without a receiver. Additionally, it must be considered that the keyboard is equipped with Bluetooth connectivity functionality. If the keyboard does not have Bluetooth support, it will not connect without a receiver.

It is often discussed among the masses that are usually not tech-savvy How to connect HP Wireless Keyboard without a receiver?

Some Essential Tips

Here are the following steps that can turn out to be worthwhile.


It’s essential to insert new batteries in the keyboard for an ample power supply. Whereas, the wireless keyboard comes with a battery slot and which is usually located at the top or at the backside of the keyboard. It is recommended to use built-in rechargeable batteries instead of AA or AAAs batteries. Additionally, if the keyboard comes with rechargeable batteries then recharge is as per instructions provided in the user manual before using it. If it’s not the case then it’s better to insert new batteries.


It cannot be denied that a wireless keyboard comes with both connectivity options. On the one hand, a small receiver is used to build up a connection between the device and the keyboard.


While on the other hand, the other connectivity option is the Bluetooth feature which means that one can also connect the keyboard to the PC or laptop via Bluetooth. To put it in a nutshell, a keyboard has a connectivity option. What we need to do is to connect it through Bluetooth. To connect it through Bluetooth, the following methods must opt as discussed to avoid any problems.


For an ideal connection, it is better to install the Bluetooth drivers if a popup alert arises. It usually depends on the keyboard and which kind of Bluetooth version is embedded. Therefore, depending on the keyboard’s Bluetooth version, windows without human intervention download the drivers from the manufacturer’s website.

If windows install the drivers automatically then it’s well in good but also if the keyboard comes with some extra features like programmable keys then keep in mind to install the official software from the manufacturer’s website. It is mandatory to read the user manuals to find out what things are required beforehand.


It is better to pair the keyboard with Bluetooth for easy connectivity. On a wireless keyboard usually, a keyboard Bluetooth button is provided. Thus, press that button. The button might also be labeled as Connect, Pairing, and Bluetooth.

Meanwhile, we need to hold the key down for 5 seconds to enter into the pairing mode. Almost all the keyboards come with a blinking LED light when they are ready to pair with another Bluetooth device. The light becomes rock solid when the keyboard is connected to the PC or laptop.


In order to connect to the Bluetooth we need to go to the system settings by clicking on the start menu and then scroll for the gear icon and click on that. It is normally located near the bottom left corner of the menu. The step we have discussed before is worthy but also there is another way to connect a laptop or PC with a keyboard is by using the Action center.

This can be accomplished by sliding the cursor to the far-right edge of the taskbar next to the clock. Then click on the notification icon in a squared chat bubble area that will appear from the right side. Then press on the Bluetooth that will secure the connection.


If the keyboard comes with Swift pair technology then we will get a popup notification inquiring to allow further notifications for swift pair. Click on the option “Yes” if you want to get notifications. Now click on the connect button on the preceding window to connect to the keyboard. If the keyboard is working at this stage we are done with the connection procedure.


In order to add to the list of variables click on Add Bluetooth or another device button. It’s the first option at the top of the right panel. Then click on the Bluetooth option. The PC will scan for new Bluetooth devices and then display them in a list of available devices.

It so easily searches for the desired keyboard and clicks on that. It might take a few seconds for the keyboard to appear in the search result as a Bluetooth device. If the keyboard does not appear in the results then turn off the Bluetooth and restart it back. If there is a pairing button then press that button.

Afterward, the instruction will appear on the screen display, follow these onscreen instructions to connect the keyboard to the PC or laptop.


Remember, depending on the model of the keyboard we might have to take extra steps to connect the pairing. Once the keyboard is paired, click on the done button or Close to the end of the window and benefit from using your wireless keyboard. These are the tips and tricks by which we can connect an HP Wireless keyboard without a receiver to a PC, laptop, or tablet without a need for a receiver.

it’s often asked if they can connect multiple devices with Bluetooth. Certainly “YES” we can. Nowadays, all laptops and related devices like printers and Bluetooth earphones can support up to 3 or 4 devices at a time. Remarkably, all these devices run smoothly without any lag or trouble.


Can a Wireless Keyboard Used to be Wired?

No, wireless keyboards cannot be used as wired keyboards. Wireless keyboards use radio frequency (RF) or Bluetooth technology to connect to a computer, while wired keyboards use physical cables.

Why Won’t my HP Wireless Keyboard Connect?

It’s possible that the batteries are low or dead and need to be replaced. If the keyboard still doesn’t connect, check if it is compatible with your device and properly installed according to the manufacturer’s instructions. If all else fails, try restarting your device or resetting the keyboard by pressing the reset button on the back.

Wrapping Up

I hope you will enjoy this blog and quickly learn important facts about connecting HP wireless keyboard without a receiver. stay connected to read more exciting articles.


Please enter your comment!
Please enter your name here