WIFI to Ethernet

In this modern era of development most of our daily chores of life solely depend on the advancements in information technology that is progressing with leaps and bounds.

convert wifi to ethernet

The majority of us are aware of the abbreviation WIFI “wireless fidelity” as it’s considered as a common commodity now. However, it is often discussed among the masses that what does the word Ethernet means and how to convert wifi to Ethernet Bridge? Ethernet is defined as a conventional technology for connecting devices in a wired local area network (LAN) or wide area network (WAN) that enables them to correspond with each other via a protocol that includes a set of rules or a common network language. Ethernet describes how network devices can format and send out data to other devices in the same local or campus area network segment that may easily recognize, collect and process the information.

Moreover, it has got an Ethernet cable that is physically encased wiring through which the data travels. Connected devices accessing a geographically localized network with a cable rather than a wireless connection are more likely to use Ethernet. Not only from business has the community to diverse end users but also gamers depended on the perks of Ethernet connectivity that in return assures reliability and security.

Furthermore, as a comparison of a wireless (WLAN) technology, Ethernet is typically less susceptible to disruptions. It can also offer a greater sense of network security and control than wireless technology as it is mandatory to connect devices using physical cable. Realistically, this makes it difficult for outsiders to access network data or take over bandwidth for unauthorized devices.

wi fi to ethernet bridge

It is mostly inquired that how to convert form WiFi to Ethernet (Wireless to Wired network)

If you have got a device that you intend to connect with WiFi though it only supports the Ethernet cable that is a wired connection. Remarkably, it can be fixed without a hassle. It only requires knowledge of how to convert WIFI to Ethernet connection then one can easily have the benefits of a wired connection even though if there is a wireless connection at home or in office setup.

In this article we will come know about WiFi to LAN along with the knowledge and information one may require during the conversion process. It usually involves some basic steps to be followed proactively.

Firstly, to do this we need a bridge device. It will work to take in the WIFI signal and convert the output as an Ethernet signal. It’s also predicted that some routers can also help out in making these conversion without an issue. Secondly , the other way to do so is to get a Firmware that will be flexible on hardware and will allow you to achieve it with no time. Thirdly, via USB WIFI adaptor. Fourthly, a WIFI station can also be a quite beneficial in this scenario which in turn might be worthy to convert WIFI into Ethernet.

Finally, there is also a possibility to make use of power line networking. The Power line networking usually involves a wired network that consists of hidden wires. Hence, this bridging technology is mostly used to extend the home network’s reach.

It’s important to know to convert the wireless connection to Ethernet then there is a need of robust wireless connection. Perhaps, If the WIFI signals are weak then they are of no use in this case.

Most of us might not be aware of a Wireless Bridge. A wireless bridge adapter is a gadget that catches the WiFi signals as an input and converts them into the Ethernet connection as an output. By this technique it is more convenient to connect the Ethernet devices to the available network. It is usually made by connecting two access points together, by doing this makes one the access point and the other one the client. The main theme behind it is that it connects two or more LAN segments that results in a formation of a single network. Now a day’s majority of smart devices can be connected only with a wired connection. Take an example of a DVD player, video game consoles and TV etc.

One the one end, if the internet modem is near those devices, then there is no issue, while on the other end, if that’s not the case, then connecting these devices to a wireless network can be a big hassle. The bridge actually works as a conversion mediator. Initially what we need to do is to log in to the router settings and get the internet connection sorted out, after that it passes the command of connection to the device. It works as a wireless client mode. Usually, the difference is in configuring the subnets. In the client mode, the administrative rights to the router are not of that importance, though with the wireless bridge they are much mandatory to have. However, the access point bridging can be enabled by the configuration settings. Moreover, the MAC addresses are set as the configuration parameter then the applications can easily discover each other via this address.

There is also a dire need to know how about a Wireless Bridge Mode Option along with its operating procedure. Firstly, via the web browser and enter the router’s IP address. Secondly, log into the provided router options. Thirdly, there is an option of a wireless bridge mode. Finally, it permits to convert WiFi to Ethernet. Though, this is usually supported in only higher-end routers.

It cannot be denied that there are advantages related to Network Bridging. Regarding computer networking a bridge can play a pivotal role that holds the responsibility of joining two networks together. The wireless bridge device works in layer two that is data link layer. They are mainly used for internetworking purposes.

wireless to ethernet bridges

Wireless to Ethernet Bridge is hardware by which WIFI clients can easily connect to the Ethernet connection. Some advantages of the bridge are, No Need for Drivers, with the layer two switches (bridge), you can easily convert a device on an Ethernet connection to a wireless network. No drivers are needed in this process. Moreover, reduction in the Cable Work means that its configurations are simple and reduce the cable work. Not only it works as a prevention mechanism for bandwidth wastage but also it manages the incoming traffic and then stops the additional data flow between the network segments.

Amazingly, it prevents bandwidth waste which as a result increases performance in the network. Take an example of a traffic police that controls the data flow and disallows unnecessary traffic. As a matter of fact that bandwidth wastage slows down network performance. This is the major root cause that results in unnecessary delays in the network. Thus, the bridge works as the bandwidth monitor and increases the bandwidth by throwing away the irrelevant data. Another important perk is that it links dissimilar network segments. Network bridging can also connect the different network segments.

LAN segments can be easily connected with a WLAN. Network Length has proven to be an icing on the cake as bridging connects individual LAN segments. Remarkably, it boosts the network length. To put it in a nutshell, there is no need to bring together the LAN by using a router or creating IP subnets. No hardware equipment is needed in this process.

As we have discussed above in the article that is Firmware has got some promising results. It helps to connect Ethernet-only device to WiFi by installing a free firmware called DD-WRT. The DD-WRT is installed in order to enhance your router’s performance by giving it more options. Another advantage is to download the Software. Firstly, we need to go to the DD-WRT website to find if your router model supports the firmware or not. Suppose it does, then download the DD-WRT latest version. If the router is unable to install the DD-WRT firmware then a used router like the Linksys WRT54G works well too.

By Installing software there is a requirement to do a hardware reset on your router. If the control panel is not opened then find the router’s IP address online. Additionally, by changing the Wireless Mode to Switch from Wifi to Ethernet to get logged into the router dashboard. From there click the wireless option then go to the basic settings. However, to connect a wired device to the internet, choose the option ‘Client Bridge’ from the wireless mode dropdown , by this way the router will be able to connect to the Ethernet-only device and will connect wirelessly to the other router or the modem. Set the same settings for the SSID, network mode, and the wireless channel as per the primary router.

The Wifi receiver with Ethernet output by power line networking. With the help of power line adapters we can effectively make use of the electrical wiring in your home walls for Ethernet cabling. These kinds of adapters convert WiFi to LAN that in turn connect the Ethernet-only devices to your home network. By this mechanism it is convenient to extend the network’s range.

It’s of pivotal importance to remember the effectiveness of the power line networking depends on the quality and durability of the house wiring. There are few basic steps for connecting a power line adapter. Firstly, get two power line adapters. Then plug one into the electrical outlet in the house that is nearer to the router. Plug the second one into the electricity outlet nearer to Ethernet-only device. In the end connect these adapters via Ethernet to the router and the personal device one is intending to use. Connect the first one to the router via Ethernet and the second one to the device via Ethernet.

The term network management key is defined as a power line networking that makes use of the main cable. Perhaps, there can be security risks in the neighborhood of houses that might make use of it. To overcome this issue a key that may be called as network manager is useful. Remarkably, the power line adapter forms a network based on this key. It encrypts the network data and makes it secure. When we buy power line adapters in pair we might get them with a common NMK (Network management key). Normally, the power line adapters launch a connection automatically but if that does not happen then it can be sorted out by pairing it manually.

In order to carry out this procedure put one adapter in the receptive mode. This adapter will then listen to the other one and try to connect with it. Afterwards, go through the same process with another adapter. In the meanwhile, these two adapters will locate each other and connect via a shared key. Some manufactures sell adapter with a common NMK. This way, by adding them to the network becomes easier as they already have the same NMK. Though, it is recommended to change this NMK from the default one in order to avoid security risks but also, if we remove the adapters from the main they will still remember the key.

Merits of Power line networking includes that it does not require any additional wiring. Wiring is mostly hidden in power line networking. One can have a long-range network with it. Amazingly, the connection is not affected by any obstacles.

The Use a USB Wireless Adapter is effective too. It consists of a device usually the size of a USB that is plugged into a computer. It is also called a dongle. It has got a simplest method to connect an Ethernet only device to WiFi. Though, wireless adapters are quite easy to set up and use. They will convert WiFi to Ethernet without any issue and in a much lesser time. This can be done by buying a wireless USB adapter and plug it into device’s USB socket. Afterwards, connect to the available network. This method can be applied on those devices that come up with a USB port.

It is also questioned that how to convert back from Ethernet to WIFI. Well we can go from Ethernet to WiFi by following methods .It can be accomplished either by changing the network adapter priority settings or by unplugging your Ethernet cable. Connect with the WiFi. On the one end, connect to your network with an Ethernet cable plugged into the laptop. By this way the network will remember this WiFi network. On the other end, changing priority orders from the menu open settings. We will need to get administrative right to use to go ahead with the process. Furthermore, go to network and internet from settings. Under this ‘change your network’ click on change adapter options. If there is a difficulty in finding out the desired option then click on the status option present on the left side window. Then right click on WiFi adapter. Click on properties and then we will see a menu pop up alert. Select ‘internet protocol version 4’ from the list. Then click on the properties button present on this popup menu. We will see one more window. In the meanwhile, go to the advanced option from the right button of this new menu pop up. Uncheck the automatic metric box in this new popup. Then in the interface metric field enter 1. By this technique WiFi will be set as default internet connection. Click oK. This will close the advanced TCP/IP seeing window. Click ok again and the Internet protocol version window will be closed. Now click ok to close the windows of WiFi properties. Finally, we have set our WiFi network adapter to 1 so from now on our PC will not connect to the plugged-in Ethernet and will connect the WiFi instead.


Please enter your comment!
Please enter your name here